Playhouse Plan / May 14, 2018 / Apolline Lajoie
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
The range of outdoor wooden playhouses from which to choose is enormous nevertheless there are a number of variables which could help limit that choice. One thing to consider will be the place where you will put the playhouse. Slap bang in the middle of the lawn or maybe round the back down in a hidden nook? The ground will have to be level and most often a firm base should be thought of. The next decision will be the proportions which is most likely influenced by the site and the access to it. Additionally the aspect should be considered - if the outdoor playhouse is going to be in the shadow of your fence or trees plus if it will make full use of summertime sunshine.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.