Playhouse Design / May 20, 2018 / Ambra Marquis
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.