Playhouse Plan / May 12, 2018 / Nicolette Sirois
Here you will find out about what it takes to execute the best playhouse plans and build a playhouse that considers the safety of your kids and the beautiful look of your yard. First you would have to consider the area on which you are going to build your kids playhouse. If your land is uneven then that would not be the best area to build a playhouse upon. If your yard is uneven then you would have to ensure that you level the area well before you build the playhouse. The more even the piece of land is the easier it would be to build the playhouse and you would also be able to make it more stable with proper support.
Buying them as a set may work out to be cheaper than buying them separately. They are also compact which saves on space. Hence if you are thinking of buying a playhouse you will also need to work out if your kids will need a climber slide or swing in the near future. If they do then an outdoor playhouse that has these attachments may be a better play set in your backyard. Ease Of Assembly Apart from the above factors you will also need to check on the ease of assembly. There is no point buying a playhouse which you cant put together because the instructions are too complicated or the parts dont fit. One good way to find out if a particular outdoor playhouse is easy to assemble or otherwise is to read up on consumer reviews. Popular outdoor playhouses usually have tons of reviews from parents and you can get a glimpse of the ease of assembly from there.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.