Playhouse Plan / May 12, 2018 / Nicolette Sirois
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.