Indoor Playhouse / May 11, 2018 / Lundy Racine
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.