Playhouse Design / May 9, 2018 / Gallia Cote
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
The range of outdoor wooden playhouses from which to choose is enormous nevertheless there are a number of variables which could help limit that choice. One thing to consider will be the place where you will put the playhouse. Slap bang in the middle of the lawn or maybe round the back down in a hidden nook? The ground will have to be level and most often a firm base should be thought of. The next decision will be the proportions which is most likely influenced by the site and the access to it. Additionally the aspect should be considered - if the outdoor playhouse is going to be in the shadow of your fence or trees plus if it will make full use of summertime sunshine.