Playhouse Design / May 9, 2018 / Gallia Cote
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Buying them as a set may work out to be cheaper than buying them separately. They are also compact which saves on space. Hence if you are thinking of buying a playhouse you will also need to work out if your kids will need a climber slide or swing in the near future. If they do then an outdoor playhouse that has these attachments may be a better play set in your backyard. Ease Of Assembly Apart from the above factors you will also need to check on the ease of assembly. There is no point buying a playhouse which you cant put together because the instructions are too complicated or the parts dont fit. One good way to find out if a particular outdoor playhouse is easy to assemble or otherwise is to read up on consumer reviews. Popular outdoor playhouses usually have tons of reviews from parents and you can get a glimpse of the ease of assembly from there.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.