Playhouse Design / May 13, 2018 / Ambra Marquis
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
Also by remembering that you can hire a professional carpenter to complete the construction of your playhouse you will not feel limited in any way when it comes to the process of selecting your playhouse plans. If you know that you will have a professional carpenter backing you up to the entire construction process you can purchase plans of any level of complexity you desire to have. It is also a good idea to remember that you can build two different kinds of playhouses. You can construct a playhouse that rests amongst the trees or you can build a small house that rests flatly on the ground. You can also choose construction plans that utilize specific themes.
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.