Playhouse Design / May 14, 2018 / Apolline Lajoie
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
Your children will spend hours enjoying their Wood Pennifield cottage playhouse. This is a playhouse that is realistic yet has a whimsy quality about it. This miniature house comes complete with a door sized for your children and shutter framed windows that actually work. This is a playhouse which will encourage your childrens imaginations to grow. Underneath each window is a flower box. Not only will flowers accentuate your childrens playhouse but they can also be used to teach your children responsibility. You can put your children in charge of planting their flowers and watering them.