Playhouse Ideas / May 14, 2018 / Apolline Lajoie
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.