Playhouse Design / May 26, 2018 / Nicolette Sirois
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
The range of outdoor wooden playhouses from which to choose is enormous nevertheless there are a number of variables which could help limit that choice. One thing to consider will be the place where you will put the playhouse. Slap bang in the middle of the lawn or maybe round the back down in a hidden nook? The ground will have to be level and most often a firm base should be thought of. The next decision will be the proportions which is most likely influenced by the site and the access to it. Additionally the aspect should be considered - if the outdoor playhouse is going to be in the shadow of your fence or trees plus if it will make full use of summertime sunshine.
Tower playhouses usually have a ladder. Need a Base for a Wooden Playhouse? You do need some variety of solid base for a childrens playhouse. Whilst most childrens playhouses come with an internal floor youll still need to provide a level base for it otherwise the walls of the playhouse might not align correctly. The easiest solid base to furnish is concrete paving slabs as six or eight large slabs can be enough to provide a big enough playhouse base are relatively cheap and quite straightforward to position.