Playhouse Plan / May 9, 2018 / Gallia Cote
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.
Next you would have to ensure that the materials being used are sturdy enough to ensure that the structure of the playhouse is safe for your kids. It would be wise if you could choose proper wooden beams to construct the playhouse with. Make certain that there are enough beams and pillars to support the walls and the ceiling. The last thing you need after executing a good playhouse plan is for the actual playhouse to cave-in. You would also have to consider your childrens preferences. There is no point building a playhouse that you like and not one that your kids like.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.