Outdoor Playhouse / May 8, 2018 / Arlette Deziel
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Tower playhouses usually have a ladder. Need a Base for a Wooden Playhouse? You do need some variety of solid base for a childrens playhouse. Whilst most childrens playhouses come with an internal floor youll still need to provide a level base for it otherwise the walls of the playhouse might not align correctly. The easiest solid base to furnish is concrete paving slabs as six or eight large slabs can be enough to provide a big enough playhouse base are relatively cheap and quite straightforward to position.