Playhouse Plan / May 12, 2018 / Nicolette Sirois
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.