Playhouse Plan / May 12, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
Building the Playhouse Roof While the playhouse floor and wall construction seems fairly straight forward I think that the roof framing is going to be a little more complicated. Depending in which climate you live a playhouse roof will get hit with rain snow and the sun not to mention a few kids climbing on top of it even though they were told not to. So Im going to try my hand at a little construction carpentry and make a gabled roof. Thats what most of the playhouse plans call for anyway so Ill take on the challenge.