Playhouse Plan / May 19, 2018 / Nicolette Sirois
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.