Playhouse Plan / May 11, 2018 / Lundy Racine
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Next you would have to ensure that the materials being used are sturdy enough to ensure that the structure of the playhouse is safe for your kids. It would be wise if you could choose proper wooden beams to construct the playhouse with. Make certain that there are enough beams and pillars to support the walls and the ceiling. The last thing you need after executing a good playhouse plan is for the actual playhouse to cave-in. You would also have to consider your childrens preferences. There is no point building a playhouse that you like and not one that your kids like.
Building the Playhouse Roof While the playhouse floor and wall construction seems fairly straight forward I think that the roof framing is going to be a little more complicated. Depending in which climate you live a playhouse roof will get hit with rain snow and the sun not to mention a few kids climbing on top of it even though they were told not to. So Im going to try my hand at a little construction carpentry and make a gabled roof. Thats what most of the playhouse plans call for anyway so Ill take on the challenge.