Indoor Playhouse / May 20, 2018 / Ambra Marquis
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Looking at some of the larger wood swing set kits this is more along the lines of what I had in mind but these are just too expensive to buy. That leaves me to build a something myself. So now Im looking at playhouse plans on the Web. I cant say Im very happy with what Ive found. Of course Ive checked out all the free playhouse plans first hoping to at least get an idea of whats involved with this kind of project. Its looking a little scary so far. Most plans seem to be written by carpenters who toss around construction terminology as if I were right there beside them on a job site. So Im off to do a little research in how playhouses are built so I can figure it out for myself.