Indoor Playhouse / May 26, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Next you would have to ensure that the materials being used are sturdy enough to ensure that the structure of the playhouse is safe for your kids. It would be wise if you could choose proper wooden beams to construct the playhouse with. Make certain that there are enough beams and pillars to support the walls and the ceiling. The last thing you need after executing a good playhouse plan is for the actual playhouse to cave-in. You would also have to consider your childrens preferences. There is no point building a playhouse that you like and not one that your kids like.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.