Indoor Playhouse / May 11, 2018 / Henriette Veilleux
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Tower playhouses usually have a ladder. Need a Base for a Wooden Playhouse? You do need some variety of solid base for a childrens playhouse. Whilst most childrens playhouses come with an internal floor youll still need to provide a level base for it otherwise the walls of the playhouse might not align correctly. The easiest solid base to furnish is concrete paving slabs as six or eight large slabs can be enough to provide a big enough playhouse base are relatively cheap and quite straightforward to position.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.