Outdoor Playhouse / May 14, 2018 / Apolline Lajoie
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
Next you would have to ensure that the materials being used are sturdy enough to ensure that the structure of the playhouse is safe for your kids. It would be wise if you could choose proper wooden beams to construct the playhouse with. Make certain that there are enough beams and pillars to support the walls and the ceiling. The last thing you need after executing a good playhouse plan is for the actual playhouse to cave-in. You would also have to consider your childrens preferences. There is no point building a playhouse that you like and not one that your kids like.