Outdoor Playhouse / May 14, 2018 / Apolline Lajoie
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Next you would have to ensure that the materials being used are sturdy enough to ensure that the structure of the playhouse is safe for your kids. It would be wise if you could choose proper wooden beams to construct the playhouse with. Make certain that there are enough beams and pillars to support the walls and the ceiling. The last thing you need after executing a good playhouse plan is for the actual playhouse to cave-in. You would also have to consider your childrens preferences. There is no point building a playhouse that you like and not one that your kids like.
Buying them as a set may work out to be cheaper than buying them separately. They are also compact which saves on space. Hence if you are thinking of buying a playhouse you will also need to work out if your kids will need a climber slide or swing in the near future. If they do then an outdoor playhouse that has these attachments may be a better play set in your backyard. Ease Of Assembly Apart from the above factors you will also need to check on the ease of assembly. There is no point buying a playhouse which you cant put together because the instructions are too complicated or the parts dont fit. One good way to find out if a particular outdoor playhouse is easy to assemble or otherwise is to read up on consumer reviews. Popular outdoor playhouses usually have tons of reviews from parents and you can get a glimpse of the ease of assembly from there.