Playhouse Design / May 15, 2018 / Arlette Deziel
Here you will find out about what it takes to execute the best playhouse plans and build a playhouse that considers the safety of your kids and the beautiful look of your yard. First you would have to consider the area on which you are going to build your kids playhouse. If your land is uneven then that would not be the best area to build a playhouse upon. If your yard is uneven then you would have to ensure that you level the area well before you build the playhouse. The more even the piece of land is the easier it would be to build the playhouse and you would also be able to make it more stable with proper support.
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.