Playhouse Plan / May 26, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.
Building the Playhouse Floor After clearing and leveling a spot in the yard most playhouse plans have me dive into building the floor. 2x6 treated lumber arranged in a grid-like pattern (joists) seems to be the favored choice of materials for this part of the construction the same way its used in building floors for real houses. I can build the floor right on top of the spot I cleared in the yard but Ill probably put down a tarp first to keep the boards dry while I work on them. Building a floor thats square at each corner will take some careful measuring and maybe a carpenters square to make sure everything is lined up.