Playhouse Design / May 26, 2018 / Nicolette Sirois
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.