Playhouse Design / May 26, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Looking at some of the larger wood swing set kits this is more along the lines of what I had in mind but these are just too expensive to buy. That leaves me to build a something myself. So now Im looking at playhouse plans on the Web. I cant say Im very happy with what Ive found. Of course Ive checked out all the free playhouse plans first hoping to at least get an idea of whats involved with this kind of project. Its looking a little scary so far. Most plans seem to be written by carpenters who toss around construction terminology as if I were right there beside them on a job site. So Im off to do a little research in how playhouses are built so I can figure it out for myself.
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.