Playhouse Design / May 26, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
The eighth step to build a playhouse is to decide on the type of roof. Your playhouse plans should recommend the best type. Just follow the directions and youll be okay. Most common types of roofs are hip or gable. The easiest being a gable since it looks like a triangle and it allows for rain and snow to drain off the roof. The hip roof is a little more complicated because it has more angles with all sides sloping down to meet the walls. It allows for snow and rain to drain easily as well however it provides more overhang if thats what you are looking for.