Playhouse Design / May 26, 2018 / Nicolette Sirois
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
A large unused yard space would sure sound like a prudent choice to construct a playhouse for kids. But for some reason the playhouses that are readily available in the market dont quite cut it. At times these ready made play houses look garish and spoil the beautiful look of your garden. Now if you are a person who doesnt wish to spoil your yards look with such garish looking plastic playhouses then you would have to have a fail proof playhouse plan that you can use to build your play house. Even after getting the best and free playhouse plans there are certain things that you would have to keep in mind.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.