Playhouse Design / May 23, 2018 / Gallia Cote
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Building a playhouse from playhouse plans purchased over the internet for your kids is much like building a shed for yourself except it is much fancier and safer because you know your children will be playing in it. If done with the right frame of mind it could be a family project. You could get as much excitement and fun out of creating the playhouse as your kids will have playing in it. To get you started in the right direction here are the basics to help you build a playhouse for your kids. * The first step is to choose a playhouse plan for your project and the best advice here is to include your kids.
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.