Playhouse Ideas / May 26, 2018 / Nicolette Sirois
Building the Playhouse Roof While the playhouse floor and wall construction seems fairly straight forward I think that the roof framing is going to be a little more complicated. Depending in which climate you live a playhouse roof will get hit with rain snow and the sun not to mention a few kids climbing on top of it even though they were told not to. So Im going to try my hand at a little construction carpentry and make a gabled roof. Thats what most of the playhouse plans call for anyway so Ill take on the challenge.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Looking at some of the larger wood swing set kits this is more along the lines of what I had in mind but these are just too expensive to buy. That leaves me to build a something myself. So now Im looking at playhouse plans on the Web. I cant say Im very happy with what Ive found. Of course Ive checked out all the free playhouse plans first hoping to at least get an idea of whats involved with this kind of project. Its looking a little scary so far. Most plans seem to be written by carpenters who toss around construction terminology as if I were right there beside them on a job site. So Im off to do a little research in how playhouses are built so I can figure it out for myself.