Playhouse Ideas / May 26, 2018 / Nicolette Sirois
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.