Indoor Playhouse / May 26, 2018 / Nicolette Sirois
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Looking at some of the larger wood swing set kits this is more along the lines of what I had in mind but these are just too expensive to buy. That leaves me to build a something myself. So now Im looking at playhouse plans on the Web. I cant say Im very happy with what Ive found. Of course Ive checked out all the free playhouse plans first hoping to at least get an idea of whats involved with this kind of project. Its looking a little scary so far. Most plans seem to be written by carpenters who toss around construction terminology as if I were right there beside them on a job site. So Im off to do a little research in how playhouses are built so I can figure it out for myself.