Indoor Playhouse / May 20, 2018 / Ambra Marquis
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.
Building the Playhouse Floor After clearing and leveling a spot in the yard most playhouse plans have me dive into building the floor. 2x6 treated lumber arranged in a grid-like pattern (joists) seems to be the favored choice of materials for this part of the construction the same way its used in building floors for real houses. I can build the floor right on top of the spot I cleared in the yard but Ill probably put down a tarp first to keep the boards dry while I work on them. Building a floor thats square at each corner will take some careful measuring and maybe a carpenters square to make sure everything is lined up.
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.