Outdoor Playhouse / May 17, 2018 / Gallia Cote
The good news about making a gabled roof is that you can buy some pretty inexpensive hardware that will essentially line up the roof rafters where you need them to go. Galvanized joist hangers will solve a lot of my problems here when it comes to hanging the rafters. There are plenty of instructions around for learning how to build a roof - for any kind of house not just playhouses. So with the pre-made joist hangers and a few instructions I think Ill be able to figure out this part of the project without too much trouble.
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
Tower playhouses usually have a ladder. Need a Base for a Wooden Playhouse? You do need some variety of solid base for a childrens playhouse. Whilst most childrens playhouses come with an internal floor youll still need to provide a level base for it otherwise the walls of the playhouse might not align correctly. The easiest solid base to furnish is concrete paving slabs as six or eight large slabs can be enough to provide a big enough playhouse base are relatively cheap and quite straightforward to position.