Outdoor Playhouse / May 17, 2018 / Gallia Cote
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
If you desire to build some of the more complex constructions that are available on the playhouse market today you should realize that you can always hire a carpenter in order to complete the task of building your playhouse. When you hire a professional to help you construct professionally designed plans for your playhouse you can be sure that the results will be more than satisfying in the end. In fact hiring a carpenter to complete the building process of your playhouse is likely one of the easiest ways to complete the job of building this type of construction overall.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.