Indoor Playhouse / May 26, 2018 / Nicolette Sirois
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
Scour the internet and find the plan that suites you and your children. Play it safe and get their opinions and you will have nothing to lose. The second step to build a playhouse is to decide where you want to place the playhouse inside your yard. You may have to do some preparation work ahead of time like creating a level playing area for the playhouse to rest upon so it is stable. Make sure it is not located under any electrical wires or tree branches that could do some damage to it later. Furthermore make sure the site is in a higher area of the yard as to not have to worry about water damage later.