Indoor Playhouse / May 11, 2018 / Lundy Racine
After that its a matter of simply attaching the 2x6s together with galvanized nails. Ill want a smooth surface on the playhouse floor for my kids to walk on so that means laying down some plywood on the 2x6 floor joists. A couple 4x8 sheets of outdoor plywood should do the trick. Building the Playhouse Walls Building walls for a playhouse is pretty much the same method carpenters use to build a house. Using simple 2x4 studs Ill lay the boards out on the ground and create each wall as a separate unit. Then with some help from a friend Ill raise the completed walls vertically and nail the corners together... just like people used to do when building barns.
Scour the internet and find the plan that suites you and your children. Play it safe and get their opinions and you will have nothing to lose. The second step to build a playhouse is to decide where you want to place the playhouse inside your yard. You may have to do some preparation work ahead of time like creating a level playing area for the playhouse to rest upon so it is stable. Make sure it is not located under any electrical wires or tree branches that could do some damage to it later. Furthermore make sure the site is in a higher area of the yard as to not have to worry about water damage later.
The eighth step to build a playhouse is to decide on the type of roof. Your playhouse plans should recommend the best type. Just follow the directions and youll be okay. Most common types of roofs are hip or gable. The easiest being a gable since it looks like a triangle and it allows for rain and snow to drain off the roof. The hip roof is a little more complicated because it has more angles with all sides sloping down to meet the walls. It allows for snow and rain to drain easily as well however it provides more overhang if thats what you are looking for.