Indoor Playhouse / May 11, 2018 / Lundy Racine
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
Thats good news. Getting Started - Make a Level Spot in the Yard Most playhouse plans start with choosing a good spot in the yard. That makes sense. This step seems to help set the stage for everything else that follows so it pays off to be careful and get this part of the project right first time out. Of course to avoid building a crooked playhouse Ill need to find a fairly level spot in the yard. This could be trickier than it seems. Even if I think a spot looks level chances are its not. I probably spend a good amount of time and energy just clearing and leveling a spot for the playhouse to sit.
Building the Playhouse Floor After clearing and leveling a spot in the yard most playhouse plans have me dive into building the floor. 2x6 treated lumber arranged in a grid-like pattern (joists) seems to be the favored choice of materials for this part of the construction the same way its used in building floors for real houses. I can build the floor right on top of the spot I cleared in the yard but Ill probably put down a tarp first to keep the boards dry while I work on them. Building a floor thats square at each corner will take some careful measuring and maybe a carpenters square to make sure everything is lined up.