Playhouse Design / May 24, 2018 / Henriette Veilleux
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
Scour the internet and find the plan that suites you and your children. Play it safe and get their opinions and you will have nothing to lose. The second step to build a playhouse is to decide where you want to place the playhouse inside your yard. You may have to do some preparation work ahead of time like creating a level playing area for the playhouse to rest upon so it is stable. Make sure it is not located under any electrical wires or tree branches that could do some damage to it later. Furthermore make sure the site is in a higher area of the yard as to not have to worry about water damage later.
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.