Playhouse Design / May 24, 2018 / Henriette Veilleux
Building the Playhouse Roof While the playhouse floor and wall construction seems fairly straight forward I think that the roof framing is going to be a little more complicated. Depending in which climate you live a playhouse roof will get hit with rain snow and the sun not to mention a few kids climbing on top of it even though they were told not to. So Im going to try my hand at a little construction carpentry and make a gabled roof. Thats what most of the playhouse plans call for anyway so Ill take on the challenge.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.