Outdoor Playhouse / May 14, 2018 / Apolline Lajoie
It is laid under the shingles and acts as a moisture barrier. The tenth and last step to build a playhouse is to install windows doors siding and trim paint and caulk everything as per playhouse plans. It is possible your playhouse plans will call for a dormer or two to fancy it up a bit. Those are easy and your playhouse plans will direct you how to install them. One last piece of advice for window installation is to use some type of safety glass to protect the children for when it breaks during play.
The plans may also call for a front porch or back deck depending on the playhouse plans. Your playhouse plans should give direction on how to complete this task. The fifth step to build a playhouse is framing the exterior walls which is very similar to framing the walls of a house except on a smaller scale. Here you have to lay out the walls on the subfloor. You will measure mark and cut top and bottom plates. Dont forget the window placement as you create the walls. Cut various headers king studs cripple studs and sills.
Scour the internet and find the plan that suites you and your children. Play it safe and get their opinions and you will have nothing to lose. The second step to build a playhouse is to decide where you want to place the playhouse inside your yard. You may have to do some preparation work ahead of time like creating a level playing area for the playhouse to rest upon so it is stable. Make sure it is not located under any electrical wires or tree branches that could do some damage to it later. Furthermore make sure the site is in a higher area of the yard as to not have to worry about water damage later.