Playhouse Design / May 25, 2018 / Lundy Racine
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.
Building a playhouse from playhouse plans purchased over the internet for your kids is much like building a shed for yourself except it is much fancier and safer because you know your children will be playing in it. If done with the right frame of mind it could be a family project. You could get as much excitement and fun out of creating the playhouse as your kids will have playing in it. To get you started in the right direction here are the basics to help you build a playhouse for your kids. * The first step is to choose a playhouse plan for your project and the best advice here is to include your kids.