Playhouse Design / May 15, 2018 / Arlette Deziel
Looking at some of the larger wood swing set kits this is more along the lines of what I had in mind but these are just too expensive to buy. That leaves me to build a something myself. So now Im looking at playhouse plans on the Web. I cant say Im very happy with what Ive found. Of course Ive checked out all the free playhouse plans first hoping to at least get an idea of whats involved with this kind of project. Its looking a little scary so far. Most plans seem to be written by carpenters who toss around construction terminology as if I were right there beside them on a job site. So Im off to do a little research in how playhouses are built so I can figure it out for myself.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
The sixth step to build a playhouse is to sheath the walls with plywood or oriented strand board (OSB). The easiest way to do this is to attach the plywood while the walls are laying down on the subfloor. However it is critical you square the walls before applying and attaching the plywood. If you use cedar plywood it will need stain to protect it if you choose not to cover it with an exterior siding. Continue by standing the walls up on the subfloor and attach the walls together. Dont forget to attach a top plate to the top of the walls...this gives it strength to hold up the roof. Repeat for inside walls.