Indoor Playhouse / May 14, 2018 / Apolline Lajoie
Decking and Sheathing Next comes the most rewarding part of the project: adding plywood panels to the roof (decking) and the walls (sheathing). For roof decking most playhouse plans call for 1/2" plywood panels that Ill simply nail down on to the rafters. Getting at the panels to nail them down might be a little tricky though. Some people suggest you go at them from inside the playhouse - with a step ladder poking up between the rafters. Then after each panel goes down Ill come down move my ladder and go back up for the next section.
The range of outdoor wooden playhouses from which to choose is enormous nevertheless there are a number of variables which could help limit that choice. One thing to consider will be the place where you will put the playhouse. Slap bang in the middle of the lawn or maybe round the back down in a hidden nook? The ground will have to be level and most often a firm base should be thought of. The next decision will be the proportions which is most likely influenced by the site and the access to it. Additionally the aspect should be considered - if the outdoor playhouse is going to be in the shadow of your fence or trees plus if it will make full use of summertime sunshine.
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.