Indoor Playhouse / May 14, 2018 / Apolline Lajoie
The ninth step to build a playhouse is to install ceiling joists and rafters as per playhouse plans. Another option is pre-manufactured wood roof trusses. If you are using rafters instead of pre-manufactured wood trusses you will need to add a girder post to each rafter in the center to give it support. The tenth step to build a playhouse is to sheath the roof with plywood and decide upon a roof covering. Most plans will call for asphalt shingles or wood shingles but its up to you. Dont forget to apply felt before laying the shingles on the roof.
The third step to build a playhouse is creating a foundation. What type of foundation you use concrete slab pier wood foundation or other depends upon the playhouse plans you have chosen. The playhouse plans should explain the proper foundation for the playhouse but you will need to take into account for local ordinances and homeowner associations rules. Always check with your local city code officials before building anything. The fourth step to build a playhouse is to create the sub-floor. Usually joists 16 inches on center covered by plywood flooring is the standard; nothing extravagant but functional and safe.
Some people like to move the playhouse in and out so that their kids can enjoy it the whole year round. If you have the same idea then you will also need to make sure that the playhouse is of the right size so that it can nicely fit into your living space. Height Of Playhouse Different playhouses have different heights. Some can barely fit a toddler while a few others can take in an adult with not much of a problem. Therefore consider the height of the outdoor playhouse before buying. If a playhouse has a low roof your kids might be bumping their heads against the doorway after barely a year.